| 1. |
It is a
SINGLE-PACK, ready to use, viscous glistening liquid which does not require the addition
of a Hardener/Catalyst at the time of use, as it is necessary in the case of Epoxy &
Polyurethane classes of Compounds. |
| 2. |
On
application, the components of this Compound penetrate into the porous floor surface of
concrete or stone through absorption and form plastic-tentacles within the finest pores
which offer an extra strength to the resultant coating to adhere with the floor surface.
Yet, this compound also takes a strong bonding with smooth and non-porous surfaces, such
as of glazed tiles, polished stones & metals. |
| 3. |
The most
conspicuous feature of this Compound is that, owing to the excellent solvation property of
its Base, the old coating softens at the time of next application and completely merges
with the new coating to produce a single consolidated coating. This means, at the time of
next application, do not remove the well-stuck part of the old coating. Simply clean up
the worn-out patches, if any, on the old coating and apply a uniform fresh coating. This
makes substantial savings in the cost of future repeat applications. |
| 4. |
On drying
& curing, the components of this compound set into a stiff and impermeable Co-polymer
plastic laminate. |
| 5. |
This compound
is Hydrophobic in character and hence, it must be applied over completely dry surface. |
| 6. |
The coating
dries up and becomes tack-free within about Six hours of application and undergoes
complete hard-drying during about a week. |
| 7. |
The coating
very well stands to the corrosive effects of 98% Sulfuric Acid, 30-32% Hydrochloric Acid,
15-20% Nitric Acid, various Organic Acids, strong Soda Ash solutions and weak Caustic
solutions. |
| 8. |
The coating
is fire-retardant and has a heat tolerance temperature of about 130-140 degC. |
| 9. |
The coating
prevents the growth of fungus, moss, algae and other vegetative as well as bacterial life. |
| 10. |
COVERAGE
: One litre of the compound gives Two coatings over about 35-40 Sq.Ft. area, depending
upon the extent of roughage of the surface. |
| 11. |
COAT-THICKNESS
: Thickness of Two Coatings is about 4 to 5 Mils
(1 Mil = 0.025mm. = 25 Microns). |
| 12. |
This Coating
Compound is offered in Grey-Matt and Colourless-Gloss finishes. |
we have
developed a unique Co-polymer plastic-based floor-coating compound that can combat this
menace which virtually eats away the beautiful floorings of stone concrete. The capability
of the coating of this compound to withstand against the drastic effects of several highly
corrosive chemicals has been exhaustively tested and confirmed by our Laboratory. 
Shake the compound in the container very well to make it uniform.
Apply the material on the surface with nylon brushes used for painting to produce a
uniform
and even
coating on the entire surface. Allow this first coat to dry for atleast 24 hours. Finally,
give a second coating over this in a similar way. Do not unduly rub the brush repeatedly
over the same spot. This leads to the formation of plastic fibers on the brush which
disturb the coating with the pulling effect caused. This is a peculiar property of this
Co-polymer compound which has a tendency to quick polymerisation. The coated surface
becomes tack-free within about 6 hours and undergoes complete hard-drying during about a
week.