trg_logo.jpg (6243 bytes)
correpel_name.jpg (5800 bytes)
A SINGLE-PACK CO-POLYMER
ANTI-CORROSION CHEMICAL COATING COMPOUND
Coat your costly machineries & structral steels to save high cost of replacements
 

 
acp_fact.jpg (7593 bytes) Please choose topic from below:
 

 

 

 

 

 

COMPARISION WITH OTHER PRODUCTS

uparr.jpg (927 bytes)
A Comparative study of our Industrial Co-polymer Anti-corrosion Coating compound, CORREPEL® ASP, against the conventional Polyurethane & Epoxy Classes of Anti-corrosion Paints.
SR. NO. TOPIC CORREPEL® ASP
THE RUST GUARD		 EPOXY & POLYURETHANE
1. Principal Single-component, ready- -to-use Co.polymer Coating Compounds. Two-component Paints. Mixture to be prepared as directed before use.
2. Unit Costwise Comparison Very low cost High cost because of higher Paint Prices.
3. Cleaning the substrate Simple mechanical cleaning by scrapers & Steel-wire brushes is enough. Sand blasting is specifically recommended.
4. Coverage Equal to Polyurethane & Epoxy Paints. ---------
5. Wetting property of the Product Instant Wetting a penetrative nature in hardened rust scales and in concrete porosities Inferior wetting and no penetrative nature because of mere facial coating properties.
6. Bonding property Very high bonding strength of coating on the substrate because of high spread, wetting and plastic tentacle formation into the hard atudded rust scales. The adhesive property gives a mere facial coating formation.
7. Peeling tendency of the coating The strongly grippy coating has absolutely no self- peeling tedency May peel off because of mere facial coating formation.
8. Brittle nature of coating, if any The fibroelastic property of   the coating material keeps laminate non-brittle No fibroelastic property of the the material. The coating tend to become brittle.
9. Special unique feature Because of excellent, solvation property of our A.C.Compound, the subsequent applications produce a very strong consolidated coating as a result of effective merger of every fresh coating with the old coating. No such property at all.
10. Suitability for concrete surface Very suitable. The plastic tentacles being penetrant the concrete porosities,the firm coating effectively prevents the erosion of concrete. Being non-penetrant in the substrate, the facial Coating has a weaker bonding strength with the concrete surface.
11. Shades & Texture of coatings Compounds offered in several Shades & Matt-finish coatings Depends, as are offered by different Paint Manufacturers.
 
SHADE CARD

uparr.jpg (927 bytes)

trg_logo.jpg (6243 bytes)

CORREPEL® ASP
A SINGLE-PACK CO-POLYMER
ANTI-CORROSION COATING COMPUND
1.jpg (5542 bytes) 2.jpg (5519 bytes) 3.jpg (5599 bytes) 4.jpg (5667 bytes) 5.jpg (5846 bytes)
ROYAL IVORY LIGHT CREAME CANARY YELLOW GOLDEN YELLOW GOLDEN BROWN
6.jpg (5702 bytes) 7.jpg (5604 bytes) 8.jpg (5851 bytes) 9.jpg (5790 bytes) 10.jpg (5883 bytes)
LIME GREEN OPALINE GREEN BUZ GREEN JADE GREEN DARK GREEN

 

11.jpg (5981 bytes) 12.jpg (6105 bytes) 13.jpg (5985 bytes) 14.jpg (5510 bytes) 15.jpg (5803 bytes)
SKY BLUE DARK BLUE OXFORD BLUE ROYAL LILAC DARK VIOLET
16.jpg (5657 bytes) 17.jpg (6049 bytes) 18.jpg (6055 bytes) 19.jpg (5739 bytes) 20.jpg (5711 bytes)
LIGHT ROSE DEEP ORANGE P.O. RED MAROON DEEP OLIVE
21.jpg (5720 bytes) 22.jpg (5635 bytes) 23.jpg (5460 bytes) 24.jpg (5664 bytes) 25.jpg (5739 bytes)
OLIVE GREEN OLIVE KHAKI LIGHT GREY MED. GREY ADM. GREY


26.jpg (4953 bytes) 27.jpg (5801 bytes)

The shade chips shown here are in glossy finish but the actual coatings produced by our material will have less gloss. For reason, variation may occur in the shades of actual coatings.
OFF WHITE BLACK
28.jpg (5742 bytes) 29.jpg (5571 bytes) 30.jpg (5750 bytes)
COPPER SILVER BRIGHT GOLD BRONZE

 
 
TESTING APPROVALS

uparr.jpg (927 bytes)
TESTING DONE BY : DEPARTMENT OF CHEMICAL TECHNOLOGY
                               UNIVERSITY OF BOMBAY

Submitted by: J. P. Marketing E-18, Ambedkar Shopping Centre,
                        Opp. Jyoti Hall, Valsad - 396 001. Gujarat. India.

Packing and description: About 1 litre of sample received in a sealed tin.

R E S U L T S

1. Viscosity by Ford cup No.4 : 20 minutes 25 seconds
2. Flash Point : 42o C
3. Consistency : Smooth and uniform.
4. Wt./litre : 9.90.90 Kg.
5. Flexibility & Adhesion : Passes
6. Stripping test : 1300 gms
7. Scratch hardness : 1200 gms
8. Salt spray test
( as per I.S. – 2047 –1962)		 : No corrosion observed
9. Resistance to sulphuric acid
(as per I. S. 158-1981)		 : No effect observed
10. Resistance to nitrating acid
(as per I. S. 159-1981)		 : No effect observed
11. Resistance to nitric acid
(as per I. S. 159-1981)		 : No effect observed
12. Effect of Heat at 125o for one hour : No effect observed
13. Dry film thickness
(thickness of two coats)		 : 130 Microns

Correpel ASP a single pack co-polymer plastic anti-corrosion chemical coating compound, gives highly durable protective
coating which prevents corrosion or rust of iron and steel against moisture, water, industrial gasses, fumes and acids and talklies
Application of paint was carried out by brush.

T E S T  R E P O R T

SR. NO. Type of Test Description Results Remarks
1. DFT   175 mm, obtained in three coats Coating was uniform dark blue in colour
2. Viscosity of the liquid   235 sec  
3. Adhesion Cross-Hatch Adhesion Test 100/100 No material was removed from the cross Hatch marks Pass
4. Flexibility Bending the coated material on conical mandrel No crack or delamination was found Passes
5. Scratch Hardness With a load of
5 Kg.		 No damage was seen Passes
6. Salt Spray Test ASTM B117, 1000h No pits, blisters or corrosion spots were observed Passes
7. Humidity Test 95% RH 50oC No rust spot was observed Passes
8. Weathering Test 4h UV / 4h Condensation 60 cycles
(480 h)		 Slight change in colouration but no chalking or cracking was observed Passes
9. Immersion test in Sulphuric acid
 (1:20)		 24h
(IS 153-1981)		 No damage was reported Passes
10. Immersion test in Nitric acid (1:20) 24h
(IS -1591969)		 -do- Passes
11. Immersion test in Alkali (5% Solution) 4h
(IS 157 - 1950)		 -do- Passes
12. Heat Resistance at
25o C		 Heating at 125oC for 4h. No declamation, cracking or peeling of layer was observed Passes

TESTING DONE BY :
GUJARAT INDUSTRIAL RESEARCH & DEPARTMENT AGENCY, VADODARA
(A GOVERNMENT OF GUJARAT ORGANISATION)

R E P O R T

1. Consistency : Smooth and uniform.
2. Viscosity by B.Ford cup No.4 : 270 Seconds and mobile viscous liquid having good workability for application.
3. Flash Point : 40o C
4. Weight Kg / 10 libs : 9.9
5. Flexibility & Adhesion
(as per I. S.101-1964)		 : No damage, no detachment, no crackling & excellent bonding of the film.
6. Stripping test
(as per I. S. 101-1964)		 : It is free from jagged edges and does not strip.
7. Scratch hardness
(as per I. S. 101-1964)		 : Satisfies the test.
8. Protection against corrosion under condition of condensation
(as per I. S. 101-1964)		 : Not observed any signs of deterioration and corrosion of metal surface.
9. Resistance to sulphuric acid
(as per I. S. 158-1981)		 : Satisfies the test and no attack of acid on the film.
10. Resistance to nitrating acid
(as per I. S. 159-1981)		 : Satisfies the test and no attack of acid on the film.
11. Resistance to nitric acid
(as per I. S. 159-1981)		 : Satisfies the test and not showing any blister or wrinkle on the film.
12. Resistance to alkali
(as per I. S. 157-1950)		 : Satisfies the test and not observed any signs of softening, blistering, chalking, cracking and no change of colour on painted film.
13. Resistance to hydrochloric acid fumes : Observed no effect on painted film.
14. Effect of Heat at 125o – 130o C : Passes test.
15. Dry film thickness
(thickness of two coats)		 : 135 Microns
16. Salt –spray test
(as per I. S. 2074)		 : Panel shoes signs of corrosion after continuous exposure for 14 days in salt-cabinet.

Remarks : This report is NOT to be used for the purpose of advertisement or legal action.
Test certificate issued in the name of our manufacturer

Home  |  Anti-Corrosion Paint  |  Anti-Corrosion Compound for Torrsteel Bars
Chemical Resistance Floor Coating Compound  | Water Proofing Compound  |   COD for ETP 
Other Products  |  About Us   |  Contact Us

All rights reserved Copyright 1999-2000 J P Marketing